What the CleanSense Bidet Seat 1500 Does
The CleanSense Bidet Seat 1500 washes you with warm water after you use the toilet. A metal-covered wand extends from under the seat when you press wash, sprays, then rinses itself and retracts. Because it is a seat, the bowl, the flush, and the plumbing all stay exactly as they are. Bidets USA is an authorized CleanSense retailer, so every seat ships with full manufacturer warranty and factory support.
Warm water that does not run out
The 1500 uses a hybrid heating system that delivers warm water on demand rather than storing a fixed amount. A long wash stays warm the whole time, and the next person in the bathroom is not waiting for anything to reheat. The water itself comes from the same fresh supply line that fills your toilet tank, never from the bowl. If that is the feature you care most about, compare the 1500 against the rest of the bidets with instant and unlimited warm water.
The features you use every day
Past the wash itself, the 1500 includes:
- A heated seat with adjustable temperature
- Adjustable water pressure and water temperature
- Massage and pulse wash, plus aerated and power wash modes
- A built-in charcoal deodorizer that filters air during use
- A soft-close lid that lowers silently instead of slamming
- A seat sensor, a child mode, and a quick-release seat for cleaning
Those are the features that separate an electric seat from a cold-water attachment, and they show up across our heated bidets and bidets with deodorizers collections.
Is there a downside to using a bidet?
The downsides of a bidet seat are cost, power, and drying. An electric seat costs more than the molded plastic seat it replaces, and it needs a grounded outlet near the toilet that some older bathrooms do not have. You also still have to dry off: the 1500 is not listed with a warm air dryer, so you pat dry with a few squares of paper or a towel. The wand needs an occasional hand clean even though it rinses itself. Set against that, many people who switch say they would not go back to paper alone, and toilet paper use drops sharply. If a hands-free finish is what you want, look at bidets with a dryer before you decide.
How to Choose Your CleanSense Bidet Seat 1500
Choosing your CleanSense Bidet Seat 1500 comes down to three checks: the shape of your bowl, whether you want the side panel or the remote, and where your nearest outlet is. Get those three right and the seat fits and works the way you expect on the first try.
1. Measure your bowl before you order
The 1500 is sold in round and elongated versions. Measure from the two seat-bolt holes at the back of the bowl to the front rim: about 16.5 inches means a round bowl, about 18.5 inches means elongated. Two more measurements matter on this seat. The bolt holes need to sit about 5-1/2 inches apart, and you need at least 1.5 inches of clearance between those holes and the front of the tank so the seat can mount and open. It fits standard one-piece and two-piece toilets. Once you have your number, compare it against the wider ranges of round bidet seats and elongated bidet seats.
2. Side panel or the 1500R remote
The 1500 comes two ways: with controls on a panel attached to the side of the seat, or as the 1500R with a remote. The wash functions are the same on both, so the decision is only about where the buttons live. A side panel keeps every control on the seat with nothing to misplace. A remote mounts on the wall within easy reach, which suits anyone who finds turning to reach a side panel awkward.
3. Check the outlet and the water line
The 1500 is electric and needs a GFCI outlet within three feet of the toilet. If there is no outlet in reach, that is an electrician's job rather than a plumber's, because the water side is only a seat swap plus a T-valve on the supply line already behind your toilet. Installation runs to five steps: prep the toilet, mount the plate, attach the seat, connect the water supply, then power up and test each function. Our bidet installation guide walks through every step, including what to check for leaks afterward.
What is the best way to clean a bidet?
The best way to clean a bidet is a light clean twice a week and a deeper clean once a month, using a soft cloth and mild soap. Unplug an electric seat first. Run the nozzle-cleaning function, then wipe the wand by hand; for mineral buildup, use a soft brush or a cloth with a little diluted vinegar. Never put bleach on nozzles or gaskets, and never spray water into the control panel or the electronics. The 1500 helps here in two ways: the metal-covered wand rinses itself before and after every use, and the quick-release seat lifts off so you can reach the hinges and the mounting area underneath. Our guide to cleaning a bidet covers the full routine, including what not to use.