Dignity Lifts Bidet Toilet Lift WL2

Dignity Lifts WL2 Bidet Toilet Lift - 300 lb Capacity

The Dignity Lifts WL2 is our all-in-one hygiene and mobility model, designed to solve both sit-to-stand transfers and post-use cleaning in a single device.

Featuring an integrated bidet with internal water heating, warm air drying, and a 14-inch motorized elevation range, the WL2 is engineered specifically for individuals who experience difficulty wiping or standing independently.

The Dignity Lifts WL2 combines motorized lifting power with complete bidet hygiene.

Lift System: Electric dual-actuator lift with 14" elevation range
Bidet Functions: Warm water wash, dual nozzles, adjustable pressure, warm air dryer
Weight Limit: 300 lbs
Toilet Compatibility: Fits elongated bowls with rim heights from 14" to 18.5"
Frame Footprint: 24 7/8" overall width

Complete Hands-Free Hygiene:

Built-in bidet and warm air dryer eliminate reaching, twisting, and manual wiping, preventing skin irritation and fungal issues

Extended 14" Standing Support:

Provides a full 14 inches of vertical rise to assist users from deep sitting positions back onto their feet

Controlled 20-Second Lift Cycle:

Smooth, steady elevation rate allows blood circulation to return to the legs, preventing sudden lightheadedness

Space-Saving 24 7/8" Width:

Compact footprint engineered to fit easily into standard 25-inch or wider building-code toilet alcoves

Fold-Up Handlebars:

Flip-up armrests clear the side space for easy wheelchair, walker, or lateral slide transfers

Simple Plumbing T-Hookup:

Plugs into your existing cold water toilet supply line and uses internal heaters to deliver warm water on demand

Dignity Lifts WL2 Installation

Dignity Lifts WL2 Compatibility

Before ordering the WL2, verify the following three bathroom specifications:

Bowl Shape & Height: Requires an elongated toilet bowl with a ceramic rim height between 14 inches and 18.5 inches from the floor.
Nook Space: Requires a minimum nook width of 25 inches (with at least 12.5 inches of clearance from the center of the bowl to each side wall).
Electrical Access: Requires a 120V GFCI-protected electrical outlet within reach of the 31-inch power cord on the lower left side of the unit.

Installation & Plumbing Steps

Preparation: Shut off the bathroom water valve, flush the toilet to drain the tank, and remove your existing toilet seat and lid.
Plumbing Connection: Thread the included plumbing T-adapter onto the toilet fill valve, then attach the water line to the WL2 internal heater.
Mounting: Position the 60 lb WL2 frame over the elongated bowl, securing it with the expanding fasteners and leveling the unit via the adjustable feet.
Power: Plug the 31" power cord into a nearby 120V GFCI wall outlet. Test both the bidet wash cycle and the 14-inch lift functionality using the handlebar controls or remotes.

Dignity Lifts WL2 Downloads

Dignity Lifts WL2 Owner's Manual

Dignity Lifts Toilet Fit Quick Guide

Dignity Lifts WL1/WL2 Installation Video

Frequently Asked Questions about Dignity Lifts WL2

Does the Dignity Lifts WL2 require hot water plumbing?

No. The WL2 connects directly to your existing cold water toilet supply line using an included T-adapter. An internal electric heater warms the water on demand.

What toilet bowl shape does the Dignity Lift WL2 fit?

The WL2 integrated bidet seat is designed specifically to fit elongated toilet bowls with rim heights between 14 inches and 18.5 inches.

How wide is the Dignity Lift WL2 bidet toilet lift?

The WL2 measures 24 7/8 inches wide overall, making it suitable for standard bathroom toilet nooks that measure at least 25 inches wide.

Smooth, Dependable Support for Daily Mobility

The WL2 removes the physical strain of sitting down and standing up from low toilet seats. Its motorized frame lifts the user over a 20-second duration, allowing stiff joints and asleep legs to adjust safely without risking a loss of balance.

Why users rely on it:

Smooth, controlled 14-inch vertical elevation
Stable 20-second sit-to-stand transition pace
Dual handlebar-integrated control buttons
Sturdy wide-stance base with removable feet
Reduced strain on knees, hips, and lower back

Complete Hands-Free Bidet & Drying Hygiene

Designed for individuals who can no longer wipe comfortably, the WL2 replaces manual cleaning with customized water washing and air drying. Simple controls activate pre-programmed gender settings or tailored water temperatures, pressures, and nozzle positions.

Made for personal comfort & cleanliness:

Integrated warm water washer with adjustable pressure
Multi-directional dual nozzle positioning
Built-in warm air dryer for complete moisture removal
Heated seat and automatic room deodorizer
Handheld remote for fully customized settings

Compact Fit & Easy Plumbing Setup

Despite housing both a motorized lift and a full-featured bidet, the WL2 maintains a compact 24 7/8" width that fits into small residential bathrooms. It tees directly into your existing cold water valve, eliminating the need for dedicated hot water plumbing lines.

Engineered for home installation:

Fits standard 14" to 18.5" elongated ceramic bowls
Compact width compatible with 25"+ alcoves
Includes plumbing T-valve and water filter line
Uses existing cold water line with internal water heater
Smooth surfaces designed for routine bathroom wiping

Smart Investment for Home Independence

Maintaining personal hygiene is essential to personal dignity and remaining at home. The WL2 resolves both transfer assistance and self-cleaning needs, protecting family members from caregiving strain and avoiding the high costs associated with assisted living facilities.

What makes the WL2 a practical choice:

Enables complete unassisted bathroom independence
Prevents fall risks and caregiver lifting injuries
Cost-effective alternative to residential care facilities
Maintains personal dignity without needing a helper
Long-term solution for aging-in-place safely

What do you get with the Dignity Lifts WL2?

The Dignity Lifts Bidet Toilet Lift WL2 is a comprehensive hygiene and sit-to-stand solution designed for individuals seeking complete bathroom independence. Combining a powerful motorized lift with a fully integrated bidet and warm air dryer, the WL2 assists with lowering, washing, drying, and standing. It eliminates the need for manual wiping, twisting, or leaning, reducing fall risks while promoting optimal personal hygiene.

Ideal for individuals with limited mobility, arthritis, or recovery needs, the WL2 offers luxury comfort features like a heated seat and automatic deodorizer—allowing users to remain safely and comfortably in their own homes.

Dignity Lifts WL2 Features

Feature	Details
Weight Capacity	Supports up to 300 lbs with heavy-duty dual-lifting actuators.
Generous 14" Lift	Elevates the seat up to 14 inches over a smooth, 20-second rise cycle.
Fully Integrated Bidet	Built-in water heater with adjustable temperature, pressure, and dual-nozzle positions.
Warm Air Dryer	Integrated blow dryer with adjustable heat settings for complete touch-free drying.
Heated Seat & Deodorizer	Built-in seat warmer and automatic deodorizing function for maximum comfort.
Intuitive Controls	Dual handlebar-integrated lift controls, main control knob, and multi-function wireless remotes.
Fold-Up Armrests	Padded handlebars flip up out of the way for smooth, unobstructed lateral transfers.

Dignity Lifts WL2 Specifications

Specification	Details
Model	Dignity Lifts Bidet Toilet Lift WL2
Product Type	Integrated Bidet & Motorized Toilet Lift
Overall Dimensions	24 7/8" W × 27" D
Distance Between Arms	19.5" (standard chair spacing)
Lift Range	14" total vertical lift
Lift Cycle Duration	Approximately 20 seconds
Product Weight	Approx. 60 lbs
Weight Capacity	300 lbs maximum
Toilet Compatibility	Fits elongated toilet bowls with heights from 14" to 18.5"
Plumbing Hookup	T-valve adapter connects directly to existing toilet supply line
Electrical Needs	Standard 120V outlet; includes 31" cord with inline GFCI protection